News

The led single-tube tri-proof lamp has the characteristics of energy saving, safety, long life, wide illumination range, high brightness and high reliability. It adopts a single T5 lamp tube, which is small in size, long in life, and high in luminous flux maintenance rate. It adopts three primary color phosphors. , High color rendering, realistic color reproduction The side cover of the lamp adopts bolt type, which plays a good role in dust-proof and waterproof. The end cover is equipped with a mounting bracket. The diameter of the lampshade is only 50mm, and the volume is smaller. This lamp adopts a built-in type. The electronic ballast is installed at one end, with a wide range of voltage options and a variety of waterproof connector forms to choose from.

LED single-tube tri-proof light chip is the core component of LED. At present, there are many LED chip manufacturers at home and abroad, but there is no unified standard for chip classification. If they are classified by power, there are high power and medium and small power; There are three kinds of blue; if they are classified by shape, they are generally divided into two types: square and round; if they are classified by voltage, they are divided into low-voltage DC chips and high-voltage DC chips. In terms of chip technology comparison at home and abroad, foreign chip technology is new, and domestic chips focus on production and not on technology. Substrate materials and wafer growth technology become the key.

How to maintain LED single-tube tri-proof light

1. The lamps and lanterns need to be maintained in use to prolong their service life. The lamps in the room should be wiped with a dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid rust damage or leakage and short circuit for a long time; lamps installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to preventing oil fume, because the accumulation of grease will affect the brightness of the lamp; the light-colored lampshade has better light transmittance, but it is easy to stain, so it should be wiped diligently so as not to affect the penetration of light; lamps If it is non-metallic, it can be wiped with a damp cloth to prevent dust from accumulating and affecting the lighting effect.

2. Moisture can easily cause lamps and lanterns to rust, fall off paint, and shorten the service life of lamps. Therefore, moisture-proof is the key to lighting maintenance, especially the lamps in bathrooms, bathrooms and stove headlights in the kitchen. Moisture-proof lampshades should be installed to prevent moisture intrusion and avoid rust damage or leakage short circuit.

3. Do not clean the utensils with water, just wipe with a dry rag dipped in water. If you accidentally touch the water, try to dry it as much as possible. Do not wipe it with a wet rag immediately after turning on the light.

4. Try not to switch on and off frequently when using lamps, because the current through the filament is greater than the current during normal operation at the moment of frequent start-up of the lamp, so that the temperature of the filament rises sharply and accelerates the sublimation, which will greatly reduce its service life. Therefore, To minimize the switch of lamps and lanterns.